Install I9195XXUCPE1 Android 4.4.2 KitKat Official Firmware for Galaxy S4 Mini GT-I9195

I9195XXUCPE1 Android 4.4.2 KitKat official firmware for Samsung Galaxy S4 Mini GT-I9195 is out and the users can now manually download the firmware zip file from here at NasirTech. Samsung time to time releasing software update for all their Android Smartphone and tablet devices and it is always recommended to update the latest available firmware for your device as with every new firmware version Samsung introduces fixes for bugs (if any), improvement in overall OS performance and sometime introduces new features. Continue reading this page to find I9195XXUCPE1 download link along with flashing instructions and rooting guide (if available).

I9195XXUCPE1 Firmware Details:

Model: GT-I9195
Model Name: Samsung Galaxy S4 Mini
Version: Android 4.4.2 KitKat
PDA: I9195XXUCPE1

I9195XXUCPE1 Download Link (s):

Note that: you can flash/install any firmware from the below list if the firmware for your country is not available, except those firmware comes with their carrier name.

France (SFR): I9195XXUCPE1_I9195SFRCPE1_SFR

Luxembourg: I9195XXUCPE1_I9195LUXCPE1_LUX

Nordic Countries: I9195XXUCPE1_I9195NEECPE1_NEE

(Firmware for rest of the countries and carrier will be added here when available)

[Please don't ask for any torrent download link for the above firmware. However, if the above link doesn't work, you can mention in comment below, we'll try to provide you with other download mirror (if available)]

I9195XXUCPE1 Installation Methods:

There are several ways by which you can update the XXUCPE1 firmware on your Galaxy S4 Mini I9195 such as- through Samsung Kies utility (from your PC), Via OTA (Over the Air, directly from your device using WiFi) and Odin method (manually download firmware and flash through Odin). Below you'll find all the three methods. 

How to Update Official Firmware on Galaxy S4 Mini GT-I9195 via OTA (Over the Air):

  1. Turn on WiFi or Mobile Data on your device (should have stable Internet connection)
  2. Go to Settings-About, and tap on the Update Option from there (If its show “The latest update have already been installed” message, then your device haven’t receive any OTA yet, check back later or try installing through Kies.)
  3. Tap OK to start the download and installation process
  4. Once done, your device will reboot automatically

How to Update Official Firmware on Galaxy S4 Mini GT-I9195 through Samsung Kies Utility:

  1. Turn on WiFi or Mobile Data on your device (should have stable Internet connection)
  2. Download and Install Samsung Kies Utility on your PC
  3. Connect your device to PC through USB
  4. Open/Run Samsung Kies, it should automatically detect your device
  5. At the Samsung Kies home screen, you’ll see New Firmware Upgrade is available notification (If it show- “This is the last firmware”, then your device haven’t received the latest firmware on Kies, check back later or try flashing manually through Odin)
  6. Click on the Firmware Upgrade button to start the update process
  7. Follow onscreen instructions
  8. Once done, your device will be reboot automatically
  9. After reboot, you can disconnect your device from PC

How to Update I9195XXUCPE1 Firmware on Galaxy S4 Mini I9195 through Odin:

Kies and OTA are the official way to update firmware but most of us prefer manual way to update official firmware. So, below you’ll find step by step manual guide to update the XXUCPE1 4.4.2 KitKat firmware on your Galaxy S4 Mini I9195 through Odin software on your PC or Laptop.

Warning!

"The firmware is released only for the Samsung Galaxy S4 Mini GT-I9195 model, so don’t try this in any other android device. Check your device model number from Settings-About Phone. Also the tutorial is based on Windows PC. NasirTech is not responsible if anything wrong happens to your device after following this guide, try this at your own risk".

Points to be noted:

1) Check battery percentage, your device should have at least 60% battery power

2) Turn on USB Debugging mode, go to Settings-General-Developer Options (As the Developer options are hidden by default on all Android device running on Android 4.2 or up, So go to Settings-General-About on your Galaxy S4 Mini and tap Build Number for 7 times to visible the Developer options.) See the image below.

Enable Developers Options

3) Backup important data and settings to external storage- follow this guide

4) Install USB driver for your device on your PC/Laptop- Download Samsung USB Driver  

5) If your Galaxy S4 Mini I9195 have any Custom ROM installed such as- CyanogenMod ROM, ParanoidAndroid ROM, AOKP ROM, SLIM ROM, PACman ROM, Avatar ROM, Omni ROM, LiquidSmooth ROM, Beanstalk ROM, Carbon ROM etc, then it’ll be replaced by stock firmware.

6) Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery

7) After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.

Steps to update I9195XXUCPE1 4.4.2 KitKat firmware on Galaxy S4 Mini I9195 through Odin: 

1) Download XXUCPE1 4.4.2 KitKat firmware for Galaxy S4 Mini I9195 from the above download section

2) Download Odin 3.09

3) Switch off and boot Galaxy S4 Mini I9195 into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.  

4) Extract the downloaded Odin3.09 zip file and run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)

5) Now connect your Galaxy S4 Mini I9195 to your computer via USB cable

6) In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.

7) Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked in Odin.

8) Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5

9) In Odin screen, click on AP (PDA in older Odin) button and select the firmware file with .tar.md5 extension (The firmware file look something like: I9195XXDLJ5_I9195ODDDLI7_INU.tar.md5)

10) Now, click on the Start button to begin the installation process, wait few moments.

Odin3

11) Once completed, you would see “PASS!” message in ID:COM port having green background

12) Your device should automatically reboot after completion

13) You can now disconnect your device from computer

14) Finish

Hope you successfully completed the update process. If you followed everything as mentioned in the above tutorial, then your device should now running on Android 4.4.2 KitKat build version number XXUCPE1. You can verify the firmware update details from Settings-About Phone.

Stuck at boot animation screen? Fix Bootloop on Galaxy S4 Mini GT-I9195

If anything goes wrong, your device may stuck at booting animation. If your Galaxy S4 Mini GT-I9195 stuck at boot animation screen for more than 10 minutes, then follow these instructions:
  • Go to Recovery Mode by pressing and holding the Volume Up+Home+Power buttons together.
  • Now, perform Wipe Data/Factory Reset and Wipe Cache Partition task before selecting the reboot system now option. In Recovery Mode use the Volume keys to navigate between options and Power key to select any option.

Root I9195XXUCPE1 4.4.2 KitKat Firmware: 

We've also arranged a step by step tutorial to root I9195XXUCPE1 4.4.2 KitKat firmware running on Samsung GT-I9195. Go to the following link for the rooting guide.

How to Root I9195XXUCPE1 Android 4.4.2 KitKat Firmware

If you are looking for anything else related to the above firmware, then mention in comment below.
Read More »

Root N920GDDS3BPI3 Android 6.0.1 Stock Firmware on Galaxy Note 5 SM-N920G

A simple method to root N920GDDS3BPI3 Android 6.0.1 Marshmallow firmware is now available at NasirTech. Samsung Galaxy Note 5 SM-N920G recently get updated to the N920GDDS3BPI3 6.0.1 Marshmallow Firmware. If you yet to update the firmware, then update the same by following this link- Install N920GDDS3BPI3 Android 6.0.1 Marshmallow Firmware for Galaxy Note 5 SM-N920G. Hope you updated this latest firmware on your device and now you can root the same using our simple tutorial below. The below guide will help you to root DDS3BPI3 6.0.1 Marshmallow Firmware running on Galaxy Note 5 SM-N920G. Continue reading the tutorial for complete guide.

After updating official firmware, your device no longer belongs to rooted device. So, after official firmware update, many of us prefer to root our device to enjoy some additional features that unrooted android device doesn't offer. With a rooted android device, you can install apps that ask root permission, flash various custom ROMs, install MODs and tweak various features. Root removes default bloatware apps that free-up lots of memory space and extend the battery life. However, once rooted, manufacturer warranty will be void. But you can regain the warranty by following proper unroot process. To know more about benefits of rooting android device, read- Complete Note on What is Rooting and Benefits of Rooting Android Phone.
Samsung Galaxy Note 5

So, want to root Galaxy Note 5 SM-N920G Running N920GDDS3BPI3 6.0.1 Marshmallow Firmware? Continue reading this page to get all the necessary steps to successfully root your device. The root file (CF-Auto-Root) we used in this tutorial is safe and have nearly 100% success rate. We'll use Odin software to flash the root file.

The tutorial is made with simple step by step guide, so that even an android newbie user can follow and successfully root his/her device. However, in this process you may loss your personal data and settings. So, we recommend you to follow all the backup instructions before proceed to rooting guide.

Warning!

  • This rooting tutorial is only applicable for Samsung Galaxy Note 5 SM-N920G model. So, don't try this in any other android device. Check your device model number from- Settings-About Phone
  • Rooting voids your phone's manufacturer warranty. However, you can get back the warranty anytime by following proper unroot process or by flashing official firmware.
  • This guide is for educational purpose and you should try this at your own risk. We are not responsible if your device experience a soft brick after following this tutorial.

Pre-Requisites:

  • Check battery percentage, charge your device to a decent level of at least 60% battery power. Your device should not turn off during installation.
  • Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
  • Backup important data and settings to external storage- follow this guide
  • Install USB driver for your device on your computer- Download Samsung USB Driver
All the above pre-requisites are very important and must be followed before proceed to installation guide. Hope you get all the above points and done as mentioned. Now, you are ready to move to the final step of this tutorial where we have arranged a step by step details guide to root Galaxy Note 5 SM-N920G running  N920GDDS3BPI3 6.0.1 Marshmallow firmware.

Steps to Root Galaxy Note 5 SM-N920G Running N920GDDS3BPI3 6.0.1 Marshmallow through Odin:

  1. Download CF-Auto-Root for Galaxy Note 5 N920G and extract the Zip file: CF-Auto-Root-noblelte-noblelteub-smn920g.zip
  2. Download Odin 3.09 and extract the Zip file: Odin3_V3.09.Zip
  3. Now, Switch off your phone and boot Galaxy Note 5 N920G into Download Mode by pressing and holding the Volume Down+Home+Power buttons together (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
  4. Run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
  5. Now connect your Galaxy Note 5 N920G to your computer via USB cable
  6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
  7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
  8. Now, click on the AP (PDA in older Odin) button and select the CF-Auto-Root-noblelte-noblelteub-smn920g.tar.md5 file.
  9. Finally, click on the Start button to begin the rooting process, wait few moments.
  10. Once completed, you would see “PASS!” message in ID:COM port having green background
  11. Your phone should automatically reboot after completion
  12. You can now disconnect your phone from computer
  13. Finish
Congrats! You have completed the tutorial to root Galaxy Note 5 N920G running N920GDDS3BPI3 6.0.1 Marshmallow Firmware. Hope you successfully done the rooting process. If you followed everything as mentioned in the above tutorial, then your Galaxy Note 5 N920G should now rooted and you have complete control over your device. Now, install apps that ask root permission or flash various custom ROMs. To verify your device is rooted or not, you can download and run the Root Checker App from Google Play Store. If you have any doubt or query about the tutorial, feel free to contact with us using the comment form below, and share your rooting experience with us.
Read More »

Install N920GDDS3BPI3 Android 6.0.1 Marshmallow Firmware for Galaxy Note 5 SM-N920G

N920GDDS3BPI3 Android 6.0.1 Marshmallow official firmware for Samsung Galaxy Note 5 SM-N920G is out and the users can now manually download the firmware zip file from here at NasirTech. Samsung time to time releasing software update for all their Android Smartphone and tablet devices and it is always recommended to update the latest available firmware for your device as with every new firmware version Samsung introduces fixes for bugs (if any), improvement in overall OS performance and sometime introduces new features. Continue reading this page to find N920GDDS3BPI3 download link along with flashing instructions and rooting guide (if available).

Samsung Galaxy Note 5 SM-N920G

N920GDDS3BPI3 Firmware Details:

Model: SM-N920G
Model Name: Samsung Galaxy Note 5
Version: Android 6.0.1 Marshmallow
PDA: N920GDDS3BPI3

N920GDDS3BPI3 Download Link (s):

Note that: you can flash/install any firmware from the below list if the firmware for your country is not available, except those firmware comes with their carrier name.

Bangladesh: N920GDDS3BPI3_N920GODD3BPI2_BNG

India: N920GDDS3BPI3_N920GODD3BPI2_INS

Sri Lanka: N920GDDS3BPI3_N920GODD3BPI2_SLK

Nepal: N920GDDS3BPI3_N920GODD3BPI2_NPL

(Firmware for rest of the countries and carrier will be added here when available)

[Please don't ask for any torrent download link for the above firmware. However, if the above link doesn't work, you can mention in comment below, we'll try to provide you with other download mirror (if available)]

N920GDDS3BPI3 Installation Methods:

There are several ways by which you can update the DDS3BPI3 firmware on your Galaxy Note 5 N920G such as- through Samsung Kies utility (from your PC), Via OTA (Over the Air, directly from your device using WiFi) and Odin method (manually download firmware and flash through Odin). Below you'll find all the three methods. 

How to Update Official Firmware on Galaxy Note 5 SM-N920G via OTA (Over the Air):

  1. Turn on WiFi or Mobile Data on your device (should have stable Internet connection)
  2. Go to Settings-About, and tap on the Update Option from there (If its show “The latest update have already been installed” message, then your device haven’t receive any OTA yet, check back later or try installing through Kies.)
  3. Tap OK to start the download and installation process
  4. Once done, your device will reboot automatically

How to Update Official Firmware on Galaxy Note 5 SM-N920G through Samsung Kies Utility:

  1. Turn on WiFi or Mobile Data on your device (should have stable Internet connection)
  2. Download and Install Samsung Kies Utility on your PC
  3. Connect your device to PC through USB
  4. Open/Run Samsung Kies, it should automatically detect your device
  5. At the Samsung Kies home screen, you’ll see New Firmware Upgrade is available notification (If it show- “This is the last firmware”, then your device haven’t received the latest firmware on Kies, check back later or try flashing manually through Odin)
  6. Click on the Firmware Upgrade button to start the update process
  7. Follow onscreen instructions
  8. Once done, your device will be reboot automatically
  9. After reboot, you can disconnect your device from PC

How to Update N920GDDS3BPI3 Firmware on Galaxy Note 5 N920G through Odin:

Kies and OTA are the official way to update firmware but most of us prefer manual way to update official firmware. So, below you’ll find step by step manual guide to update the DDS3BPI3 6.0.1 Marshmallow firmware on your Galaxy Note 5 N920G through Odin software on your PC or Laptop.

Warning!

"The firmware is released only for the Galaxy Note 5 SM-N920G model, so don’t try this in any other android device. Check your device model number from Settings-About Phone. Also the tutorial is based on Windows PC. NasirTech is not responsible if anything wrong happens to your device after following this guide, try this at your own risk".

Points to be noted:

1) Check battery percentage, your device should have at least 60% battery power

2) Turn on USB Debugging mode, go to Settings-General-Developer Options (As the Developer options are hidden by default on all Android device running on Android 4.2 or up, So go to Settings-General-About on your Galaxy Note 5 and tap Build Number for 7 times to visible the Developer options.) See the image below.

Enable Developers Options

3) Backup important data and settings to external storage- follow this guide

4) Install USB driver for your device on your PC/Laptop- Download Samsung USB Driver  

5) If your Galaxy Note 5 N920G have any Custom ROM installed such as- CyanogenMod ROM, ParanoidAndroid ROM, AOKP ROM, SLIM ROM, PACman ROM, Avatar ROM, Omni ROM, LiquidSmooth ROM, Beanstalk ROM, Carbon ROM etc, then it’ll be replaced by stock firmware.

6) Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery

7) After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.

Steps to update N920GDDS3BPI3 6.0.1 Marshmallow firmware on Galaxy Note 5 N920G through Odin: 

1) Download DDS3BPI3 6.0.1 Marshmallow firmware for Galaxy Note 5 N920G from the above download section

2) Download Odin 3.09

3) Switch off and boot Galaxy Note 5 N920G into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.  

4) Extract the downloaded Odin3.09 zip file and run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)

5) Now connect your Galaxy Note 5 N920G to your computer via USB cable

6) In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.

7) Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked in Odin.

8) Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5

9) In Odin screen, click on AP (PDA in older Odin) button and select the firmware file with .tar.md5 extension (The firmware file look something like: N920GXXDLJ5_N920GODDDLI7_INU.tar.md5)

10) Now, click on the Start button to begin the installation process, wait few moments.

Odin3

11) Once completed, you would see “PASS!” message in ID:COM port having green background

12) Your device should automatically reboot after completion

13) You can now disconnect your device from computer

14) Finish

Hope you successfully completed the update process. If you followed everything as mentioned in the above tutorial, then your device should now running on Android 6.0.1 Marshmallow build version number DDS3BPI3. You can verify the firmware update details from Settings-About Phone.

Stuck at boot animation screen? Fix Bootloop on Galaxy Note 5 SM-N920G
If anything goes wrong, your device may stuck at booting animation. If your Galaxy Note 5 SM-N920G stuck at boot animation screen for more than 10 minutes, then follow these instructions:
  • Go to Recovery Mode by pressing and holding the Volume Up+Home+Power buttons together.
  • Now, perform Wipe Data/Factory Reset and Wipe Cache Partition task before selecting the reboot system now option. In Recovery Mode use the Volume keys to navigate between options and Power key to select any option.

Root N920GDDS3BPI3 6.0.1 Marshmallow Firmware: 

Tutorial to root N920GDDS3BPI3 6.0.1 Marshmallow firmware running on Samsung SM-N920G is not available at this moment. We'll update the link when available.

How to Root N920GDDS3BPI3 Android 6.0.1 Marshmallow Firmware

If you are looking for anything else related to the above firmware, then mention in comment below.
Read More »

Update J500FNXXU1BPH1 Android 6.0.1 Marshmallow Firmware for Galaxy J5 SM-J500FN

J500FNXXU1BPH1 Android 6.0.1 Marshmallow official firmware for Samsung Galaxy J5 SM-J500FN is out and the users can now manually download the firmware zip file from here at NasirTech. Samsung time to time releasing software update for all their Android Smartphone and tablet devices and it is always recommended to update the latest available firmware for your device as with every new firmware version Samsung introduces fixes for bugs (if any), improvement in overall OS performance and sometime introduces new features. Continue reading this page to find J500FNXXU1BPH1 download link along with flashing instructions and rooting guide (if available).

Samsung Galaxy J5 SM-J500FN

J500FNXXU1BPH1 Firmware Details:

Model: SM-J500FN
Model Name: Samsung Galaxy J5
Version: Android 6.0.1 Marshmallow
PDA: J500FNXXU1BPH1

J500FNXXU1BPH1 Download Link (s):

Note that: you can flash/install any firmware from the below list if the firmware for your country is not available, except those firmware comes with their carrier name.

Italy (TIM): J500FNXXU1BPH1_J500FNTIM1BPH1_TIM

Portugal (TPH): J500FNXXU1BPH1_J500FNOXX1BPH1_TPH

United Kingdom (EE): J500FNXXU1BPH1_J500FNEVR1BPH1_EVR

Poland: J500FNXXU1BPH1_J500FNXEO1BPH1_XEO

(Firmware for rest of the countries and carrier will be added here when available)

[Please don't ask for any torrent download link for the above firmware. However, if the above link doesn't work, you can mention in comment below, we'll try to provide you with other download mirror (if available)]

J500FNXXU1BPH1 Installation Methods:

There are several ways by which you can update the XXU1BPH1 firmware on your Galaxy J5 J500FN such as- through Samsung Kies utility (from your PC), Via OTA (Over the Air, directly from your device using WiFi) and Odin method (manually download firmware and flash through Odin). Below you'll find all the three methods. 

How to Update Official Firmware on Galaxy J5 SM-J500FN via OTA (Over the Air):

  1. Turn on WiFi or Mobile Data on your device (should have stable Internet connection)
  2. Go to Settings-About, and tap on the Update Option from there (If its show “The latest update have already been installed” message, then your device haven’t receive any OTA yet, check back later or try installing through Kies.)
  3. Tap OK to start the download and installation process
  4. Once done, your device will reboot automatically

How to Update Official Firmware on Galaxy J5 SM-J500FN through Samsung Kies Utility:

  1. Turn on WiFi or Mobile Data on your device (should have stable Internet connection)
  2. Download and Install Samsung Kies Utility on your PC
  3. Connect your device to PC through USB
  4. Open/Run Samsung Kies, it should automatically detect your device
  5. At the Samsung Kies home screen, you’ll see New Firmware Upgrade is available notification (If it show- “This is the last firmware”, then your device haven’t received the latest firmware on Kies, check back later or try flashing manually through Odin)
  6. Click on the Firmware Upgrade button to start the update process
  7. Follow onscreen instructions
  8. Once done, your device will be reboot automatically
  9. After reboot, you can disconnect your device from PC

How to Update J500FNXXU1BPH1 Firmware on Galaxy J5 J500FN through Odin:

Kies and OTA are the official way to update firmware but most of us prefer manual way to update official firmware. So, below you’ll find step by step manual guide to update the XXU1BPH1 6.0.1 Marshmallow firmware on your Galaxy J5 J500FN through Odin software on your PC or Laptop.

Warning!

"The firmware is released only for the Samsung Galaxy J5 SM-J500FN model, so don’t try this in any other android device. Check your device model number from Settings-About Phone. Also the tutorial is based on Windows PC. NasirTech is not responsible if anything wrong happens to your device after following this guide, try this at your own risk".

Points to be noted:

1) Check battery percentage, your device should have at least 60% battery power

2) Turn on USB Debugging mode, go to Settings-General-Developer Options (As the Developer options are hidden by default on all Android device running on Android 4.2 or up, So go to Settings-General-About on your Galaxy J5 and tap Build Number for 7 times to visible the Developer options.) See the image below.

Enable Developers Options

3) Backup important data and settings to external storage- follow this guide

4) Install USB driver for your device on your PC/Laptop- Download Samsung USB Driver  

5) If your Galaxy J5 J500FN have any Custom ROM installed such as- CyanogenMod ROM, ParanoidAndroid ROM, AOKP ROM, SLIM ROM, PACman ROM, Avatar ROM, Omni ROM, LiquidSmooth ROM, Beanstalk ROM, Carbon ROM etc, then it’ll be replaced by stock firmware.

6) Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery

7) After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.

Steps to update J500FNXXU1BPH1 6.0.1 Marshmallow firmware on Galaxy J5 J500FN through Odin: 

1) Download XXU1BPH1 6.0.1 Marshmallow firmware for Galaxy J5 J500FN from the above download section

2) Download Odin 3.09

3) Switch off and boot Galaxy J5 J500FN into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.  

4) Extract the downloaded Odin3.09 zip file and run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)

5) Now connect your Galaxy J5 J500FN to your computer via USB cable

6) In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.

7) Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked in Odin.

8) Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5

9) In Odin screen, click on AP (PDA in older Odin) button and select the firmware file with .tar.md5 extension (The firmware file look something like: J500FNXXDLJ5_J500FNODDDLI7_INU.tar.md5)

10) Now, click on the Start button to begin the installation process, wait few moments.

Odin3

11) Once completed, you would see “PASS!” message in ID:COM port having green background

12) Your device should automatically reboot after completion

13) You can now disconnect your device from computer

14) Finish

Hope you successfully completed the update process. If you followed everything as mentioned in the above tutorial, then your device should now running on Android 6.0.1 Marshmallow build version number XXU1BPH1. You can verify the firmware update details from Settings-About Phone.

Stuck at boot animation screen? Fix Bootloop on Galaxy J5 SM-J500FN

If anything goes wrong, your device may stuck at booting animation. If your Galaxy J5 SM-J500FN stuck at boot animation screen for more than 10 minutes, then follow these instructions:
  • Go to Recovery Mode by pressing and holding the Volume Up+Home+Power buttons together.
  • Now, perform Wipe Data/Factory Reset and Wipe Cache Partition task before selecting the reboot system now option. In Recovery Mode use the Volume keys to navigate between options and Power key to select any option.

Root J500FNXXU1BPH1 6.0.1 Marshmallow Firmware: 

Tutorial to root J500FNXXU1BPH1 6.0.1 Marshmallow firmware running on Samsung SM-J500FN is not available at this moment. We'll update the link when available.

How to Root J500FNXXU1BPH1 Android 6.0.1 Marshmallow Firmware

If you are looking for anything else related to the above firmware, then mention in comment below.
Read More »

Install J500FNXXU1BPH3 Android 6.0.1 Marshmallow Firmware for Galaxy J5 SM-J500FN

J500FNXXU1BPH3 Android 6.0.1 Marshmallow official firmware for Samsung Galaxy J5 SM-J500FN is out and the users can now manually download the firmware zip file from here at NasirTech. Samsung time to time releasing software update for all their Android Smartphone and tablet devices and it is always recommended to update the latest available firmware for your device as with every new firmware version Samsung introduces fixes for bugs (if any), improvement in overall OS performance and sometime introduces new features. Continue reading this page to find J500FNXXU1BPH3 download link along with flashing instructions and rooting guide (if available).

Samsung Galaxy J5 SM-J500FN

J500FNXXU1BPH3 Firmware Details:

Model: SM-J500FN
Model Name: Samsung Galaxy J5
Version: Android 6.0.1 Marshmallow
PDA: J500FNXXU1BPH3

J500FNXXU1BPH3 Download Link (s):

Note that: you can flash/install any firmware from the below list if the firmware for your country is not available, except those firmware comes with their carrier name.

Spain (Vodafone): J500FNXXU1BPH3_J500FNVFR1BPI1_ATL

Italy (Vodafone): J500FNXXU1BPH3_J500FNVFR1BPI1_OMN

Portugal (Vodafone): J500FNXXU1BPH3_J500FNVFR1BPI1_TCL

Romania (Vodafone): J500FNXXU1BPH3_J500FNVFG1BPI1_CNX

Greece (Vodafone): J500FNXXU1BPH3_J500FNVFG1BPI1_VGR

(Firmware for rest of the countries and carrier will be added here when available)

[Please don't ask for any torrent download link for the above firmware. However, if the above link doesn't work, you can mention in comment below, we'll try to provide you with other download mirror (if available)]

J500FNXXU1BPH3 Installation Methods:

There are several ways by which you can update the XXU1BPH3 firmware on your Galaxy J5 J500FN such as- through Samsung Kies utility (from your PC), Via OTA (Over the Air, directly from your device using WiFi) and Odin method (manually download firmware and flash through Odin). Below you'll find all the three methods. 

How to Update Official Firmware on Galaxy J5 SM-J500FN via OTA (Over the Air):

  1. Turn on WiFi or Mobile Data on your device (should have stable Internet connection)
  2. Go to Settings-About, and tap on the Update Option from there (If its show “The latest update have already been installed” message, then your device haven’t receive any OTA yet, check back later or try installing through Kies.)
  3. Tap OK to start the download and installation process
  4. Once done, your device will reboot automatically

How to Update Official Firmware on Galaxy J5 SM-J500FN through Samsung Kies Utility:

  1. Turn on WiFi or Mobile Data on your device (should have stable Internet connection)
  2. Download and Install Samsung Kies Utility on your PC
  3. Connect your device to PC through USB
  4. Open/Run Samsung Kies, it should automatically detect your device
  5. At the Samsung Kies home screen, you’ll see New Firmware Upgrade is available notification (If it show- “This is the last firmware”, then your device haven’t received the latest firmware on Kies, check back later or try flashing manually through Odin)
  6. Click on the Firmware Upgrade button to start the update process
  7. Follow onscreen instructions
  8. Once done, your device will be reboot automatically
  9. After reboot, you can disconnect your device from PC

How to Update J500FNXXU1BPH3 Firmware on Galaxy J5 J500FN through Odin:

Kies and OTA are the official way to update firmware but most of us prefer manual way to update official firmware. So, below you’ll find step by step manual guide to update the XXU1BPH3 6.0.1 Marshmallow firmware on your Galaxy J5 J500FN through Odin software on your PC or Laptop.

Warning!

"The firmware is released only for the Samsung Galaxy J5 SM-J500FN model, so don’t try this in any other android device. Check your device model number from Settings-About Phone. Also the tutorial is based on Windows PC. NasirTech is not responsible if anything wrong happens to your device after following this guide, try this at your own risk".

Points to be noted:

1) Check battery percentage, your device should have at least 60% battery power

2) Turn on USB Debugging mode, go to Settings-General-Developer Options (As the Developer options are hidden by default on all Android device running on Android 4.2 or up, So go to Settings-General-About on your Galaxy J5 and tap Build Number for 7 times to visible the Developer options.) See the image below.

Enable Developers Options

3) Backup important data and settings to external storage- follow this guide

4) Install USB driver for your device on your PC/Laptop- Download Samsung USB Driver  

5) If your Galaxy J5 J500FN have any Custom ROM installed such as- CyanogenMod ROM, ParanoidAndroid ROM, AOKP ROM, SLIM ROM, PACman ROM, Avatar ROM, Omni ROM, LiquidSmooth ROM, Beanstalk ROM, Carbon ROM etc, then it’ll be replaced by stock firmware.

6) Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery

7) After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.

Steps to update J500FNXXU1BPH3 6.0.1 Marshmallow firmware on Galaxy J5 J500FN through Odin: 

1) Download XXU1BPH3 6.0.1 Marshmallow firmware for Galaxy J5 J500FN from the above download section

2) Download Odin 3.09

3) Switch off and boot Galaxy J5 J500FN into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.  

4) Extract the downloaded Odin3.09 zip file and run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)

5) Now connect your Galaxy J5 J500FN to your computer via USB cable

6) In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.

7) Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked in Odin.

8) Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5

9) In Odin screen, click on AP (PDA in older Odin) button and select the firmware file with .tar.md5 extension (The firmware file look something like: J500FNXXDLJ5_J500FNODDDLI7_INU.tar.md5)

10) Now, click on the Start button to begin the installation process, wait few moments.

Odin3

11) Once completed, you would see “PASS!” message in ID:COM port having green background

12) Your device should automatically reboot after completion

13) You can now disconnect your device from computer

14) Finish

Hope you successfully completed the update process. If you followed everything as mentioned in the above tutorial, then your device should now running on Android 6.0.1 Marshmallow build version number XXU1BPH3. You can verify the firmware update details from Settings-About Phone.

Stuck at boot animation screen? Fix Bootloop on Galaxy J5 SM-J500FN

If anything goes wrong, your device may stuck at booting animation. If your Galaxy J5 SM-J500FN stuck at boot animation screen for more than 10 minutes, then follow these instructions:
  • Go to Recovery Mode by pressing and holding the Volume Up+Home+Power buttons together.
  • Now, perform Wipe Data/Factory Reset and Wipe Cache Partition task before selecting the reboot system now option. In Recovery Mode use the Volume keys to navigate between options and Power key to select any option.

Root J500FNXXU1BPH3 6.0.1 Marshmallow Firmware: 

Tutorial to root J500FNXXU1BPH3 6.0.1 Marshmallow firmware running on Samsung SM-J500FN is not available at this moment. We'll update the link when available.

How to Root J500FNXXU1BPH3 Android 6.0.1 Marshmallow Firmware

If you are looking for anything else related to the above firmware, then mention in comment below.
Read More »

Main Featires of Samsung Galaxy C9

Samsung Galaxy C9 is not yet announced . Check out important features of Samsung Galaxy C9 which is listed below. Here we have listed only main features or primary features of the device and not the complete specifications of Samsung Galaxy C9 .

Along with important or notable features of Samsung Galaxy C9 , you will also find additional details related to Samsung Galaxy C9 such as how to update software or firmware, how to root, how to enter download mode, how to enter recovery mode and more.
Samsung Galaxy C9

Main Features of Samsung Galaxy C9 :

SIM Type: 

Dual SIM (Nano-SIM, dual stand-by)

Display/Screen Type: 

6.0 inches, Super AMOLED capacitive touchscreen,  1080 x 1920 pixels

Operating System (OS):

Android OS, v6.0.1 (Marshmallow)

Chipset, CPU, GPU:

Qualcomm MSM8976 Snapdragon 652, Octa-core (4x1.8 GHz Cortex-A72 & 4x1.4 GHz Cortex-A53), Adreno 510

RAM: 

6 GB

Internal Memory: 

64 GB

External Memory: 

microSD, up to 256 GB

Primary/Rear/Back Camera: 

16 MP, autofocus, dual-LED (dual tone) flash

Secondary/Front Camera: 

16 MP, 

Battery:

Non-removable battery

Samsung Galaxy C9 Download Mode: 

To boot into download mode, first switch off your Samsung Galaxy C9 and press and hold Volume Down+Home+Power button together [long press until a confirmation screen appear]. Now press Volume Up button to boot into download mode. Download mode is required when you wish to update or flash firmware or root your device.

Samsung Galaxy C9 Recovery Mode:

To enter into recovery mode, first switch off your Samsung Galaxy C9 and press and hold Volume Up+Home+Power button together [long press until Samsung logo appears on screen, and wait a moment]. From the recovery screen you can do multiple task such as- 
apply update from ADB
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache 

Latest firmware for Samsung Galaxy C9 :

In this section you will find latest official firmware available for your device along with complete installation instructions. Check out latest stock firmware for the device from the below link.

Official firmware for Samsung Galaxy C9  

[if the link is not active then check back later for active link]

Root Samsung Galaxy C9 :

In this section you will find working root method available for your device along with complete rooting instructions. Check out working root methods for the device from the below link.

How to Root Samsung Galaxy C9  

[if the link is not active then check back later for active link]   

If you are looking for anything other information related to Samsung Galaxy C9  then feel free to contact with us using our contact form or drop a comment in the below comment section.
Read More »